Custom Front Doors Toronto: Cost, Timelines, and What to Expect
A custom door is built for your home. It fits your opening, your style, and your climate. Toronto gets cold winters and hot summers. Joints move. Frames swell and shrink. A well made custom unit stays straight and sealed. It cuts drafts and noise. It improves comfort and security. You choose the look. Choose the material. Choose the glass and hardware. The result feels solid. It looks right from the street. It works right every day.
Custom also means fewer compromises. Sightlines line up with your sidelites. Thresholds meet your flooring cleanly. Hardware sits at the height you prefer. Weatherstripping matches the door skin. The installer plans for sun, wind, and exposure. The finish suits your façade. You get a door that performs and lasts.
What does a custom front door include?
Custom means the door is made for your opening and your style. It is not a grab-and-go box from a shelf. It is measured, specified, and built to fit.
Made to measure vs stock
A made-to-measure door fits your frame. It seals better. It reduces drafts and noise. It arrives pre-hung with the right sill and weatherstripping. A stock door may need shims and fillers. That can hurt performance. Custom sizing helps your lock and latch align. That helps security and daily use.
Design options you can choose
You control the look and feel. You choose the material: fiberglass for stability, steel for a crisp modern look, or wood accents for warmth. You choose the panel style: flat, shaker, or sculpted. You choose the glass: clear, frosted, or decorative. You choose the colour or stain. You choose the hardware: pull bars, lever sets, smart locks, and multipoint locks. You can also add sidelites and a transom to bring in light.
Performance details that matter in Toronto
Toronto has freeze-thaw cycles and wind. You need a door that stays straight and tight. Fiberglass skins resist warping. Composite frames resist rot. Quality weatherstripping and a good threshold stop drafts. A foam-insulated core improves R-value. A multipoint lock pulls the slab tight at the top and bottom. That helps security and the air seal. If your entry faces strong sun, lighter colours reduce heat buildup. Low-E glass helps with energy and glare.
What you get from the in-home consult
A specialist visits your home. They confirm measurements. They check exposure and shade. They show samples for colours and glass. They help match styles to your house. You get a firm quote and a clear timeline. You also get care and warranty details so you know what to expect.
Cost in Toronto
Custom work has a range. Here are clear starting numbers for typical projects we do in the GTA.
Steel single entry: from $2,500 installed
Fiberglass single entry: from $2,600 installed
Single with one sidelite: from $3,900 installed
Double entry: from $3,900 installed
These are base figures for a standard size and a standard finish. Size, glass, and hardware change the price. Two tone finishing can add cost. Oversized heights add cost. Specialty glass and pull bars add cost.
Typical add-ons that affect the price
Sidelite or transom: often adds $700 to $1,800 each, based on size and glass.
Decorative or privacy glass: simple frosted or satin glass starts low. Patterned or textured units can add $300 to $1,200.
Multipoint lock: usually adds $250 to $600 plus prep.
Smart lock set: adds $250 to $450.
Two tone finish: interior one colour and exterior another can add $200 to $500.
Oversized slabs: 8 ft heights or wide panels add material and freight. Expect $400 to $1,200 more.
Capping and trim: aluminum capping and interior casing can add $200 to $600.
Frame repair or reframing: allow $200 to $800 if needed.
Removal and disposal: often included. If not, budget $100 to $200.
These are what moves the number most
Material.
Configuration.
Glass
Hardware
Finishing
Site work
Timelines: From Consult To Installed
Custom work follows a simple chain of steps. Each step has a clear time window.
1) In-home consult
We schedule within 1 to 3 days in most cases. We measure, check the sun and wind, review styles and hardware. We talk about budget and timing. Photos are taken for production.
2) Design and final quote
You get drawings and a clear quote in 3 to 7 days. You approve the design. You select hardware and glass. A deposit places the order. If your home is in a heritage area we guide you on approvals.
3) Production remeasure
For complex entries we may return for a quick remeasure. This takes 20 to 40 minutes. It protects fit and finish.
4) Fabrication
Typical lead time is 4 to 8 weeks after approval. Custom glass can add 1 to 2 weeks. Two tone finishing can add 3 to 5 days. Oversized doors can add time for freight scheduling.
5) Pre-install call
You get a scheduling call 3 to 7 days before install. We confirm access, parking, and elevator booking if you are in a condo. We confirm pet and alarm details.
6) Installation day
Most entries take half a day to one full day.
What happens on site:
Protect floors and set tools
Remove the old unit and dispose
Prepare the opening and check level
Set the new frame and shim
Foam insulate and seal the perimeter
Install hardware and test the lock
Install exterior capping and interior trim
Clean work area and walk you through care
7) Cure and after-care
Foam and sealants cure over 24 to 48 hours. Weatherstrips may relax in 1 to 2 weeks. Call if you want a quick check. Keep the threshold clear. Wipe seals clean with a damp cloth.
Seasonal notes
Spring and fall book fast. Winter installs are fine with proper barriers and heat. Direct sun on west entries can affect finish cure times. Condo installs need board permission and elevator booking which can add 2 to 5 days.
What can delay a project
Late hardware decisions. Heritage approvals. Custom patterned glass. Site repairs found at removal. Severe weather. You will get updates if any of these appear.
Warranty and service
You get product coverage and workmanship coverage. That means the door components have a factory warranty. The installation has a labor warranty.
Typical coverage from Delco
Door slab and frame. Against defects in materials and manufacturing.
Glass units. Against seal failure and fogging.
Finish. Factory paint or stain covered for a set period.
Hardware. Covered by the hardware maker.
Workmanship
Installation is covered for a defined term. If something settles or needs adjustment, we come back. Most tweaks happen in the first few weeks as seals relax.
What is maintenance
Keep the threshold clean. Wipe weatherstrips with a damp cloth. Touch up paint if you chip it. Lube hinges once a year with a light oil. These tasks are normal upkeep.
How service works
Call or email with your order number. Send a photo if you can. We troubleshoot by phone first. If a visit is needed we schedule a window. Most service calls are completed in one visit.
Transferable coverage
If you sell your home, tell the buyer about the warranty. Many programs are transferable. This can add value when you list the house.
Financing & Payment Options
You can spread the cost in a few simple ways. These plans reflect Delco’s current offers and what is common in Toronto right now.
1) No interest. No payments. 180 days.
Buy now and start paying after six months. This is a deferral plan. Fees may apply. Approval is required. Offered through Snap Home Finance.
2) Equal monthly payments over 36 months
Pay a fixed amount each month for three years. Interest applies. Approval is required. Also through Snap Home Finance.
3) Seasonal “0% for a limited term” promos
From time to time, Toronto door companies run 0% promos for short terms like 6 to 12 months. Availability changes with the season. Ask what is active when you order.
4) Pay in full methods
E-transfer, major credit cards, or cheque on milestones. Use this if you do not want financing. Delco lists flexible payment options on site.
How to apply
Application is quick. Most lenders do a soft credit check first. Approval can arrive in minutes. Your consultant will send you a secure link during the quote stage. Plans are subject to credit approval. Terms can change. We will confirm the exact rate and payment before you sign.
Tip to keep payments low
Pick hardware and glass before final measure. It reduces change orders. Long deferrals are good if you have other projects first. Equal-pay plans are good if you want a steady monthly budget. Toronto peers commonly offer similar structures, so rates are competitive.
FAQs
Can I combine the 180-day deferral with equal payments?
You usually pick one plan. Some lenders let you roll into equal payments after the deferral ends. We will show you both options at checkout.
Is there a “no interest for 12 months” option?
Sometimes. Local providers run 6 to 12 month promos during peak seasons. Ask what is active when you order.
What are the typical approval requirements?
Government ID, Canadian address, and a credit check. Household income helps set your limit. Approval is case by case.
Are there fees on the 180-day plan?
Yes. Deferral plans often include admin fees. We will disclose any fees in writing before you sign.
Can I pay off early without a penalty?
Most equal payment plans allow early payoff. Check your lender terms. We can review them with you before you decide.
What deposit do you take if I finance?
Many financed orders still take a small deposit at approval. It secures materials and the production slot. Deposit amounts vary by plan.
Do prices change if I do not finance?
No. The door price is the same. Financing only changes how you pay. Any lender fees are listed on your agreement.
Is financing available for condos and townhomes?
Yes. Plans apply to houses, townhomes, and condos. Condo installs may need board approval and elevator booking. That does not affect financing.
Can I stack a promo discount with financing?
It depends on the offer. Some promos cannot be combined. We will check the fine print for you.
Where can I see the latest financing details?
See Delco’s financing page for current options. We will also confirm terms in your quote and contract.
